[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Australian MMC order



Original poster: Thomas <tom-at-pwrcom-dot-com.au> 

Have you tried RS components?

www.rswww-dot-com.au

They have 1500V 0.01uF to 0.1uF polypropylene values in stock, I've
successfully used the 0.022uF and 0.047uF caps (page 120 of the 2003
catalogue).

Minimum order quantity = 1

They have HV 10M resistors too.

I'm in a real hurry right now but if you like I can look up the part numbers
later.

Tom L.

 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Tuesday, 2 December 2003 02:10
 > To: tesla-at-pupman-dot-com
 > Subject: Australian MMC order
 >
 >
 > Original poster: "Paul Arrowsmith" <p_t_arrowsmith-at-hotmail-dot-com>
 >
 > Any Australian coilers need some MMC capacitors?, I need 30
 > but the min
 > order is 50 from Richardson Electronics, Bayswater NSW.
 > If you want some Corner Dubilier 942C20p15K .15uF 2KV caps
 > then please let
 > me know (<mailto:pandt-at-tpg-dot-com.au>pandt-at-tpg-dot-com.au) so we can
 > do a bulk
 > purchase.
 > There would be about a 6 week delay once ordered
 > They are $3.90 AUD each at the moment as the exchange rate is
 > favourable.
 > Paul A.
 >
 >
 >