[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Dr. Resonance Pig Recasing



Original poster: "Terry Blake by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tb3-at-att-dot-net>

Hi Dr,

How much would that recasing add to the cost?
Is that a lot smaller than the original pig size?
Is the final weight (with oil) much lower than the original pig?
Why not 2 HV ears?

Enquiring minds need to know.

Terry Blake
Coiling in Chicago


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, September 06, 2002 8:12 PM
Subject: Re: Surplus Power Equipment?


> Original poster: "D.C. Cox by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<resonance-at-jvlnet-dot-com>
>
>
> Another option for more distant coil builders:  we could pull the
core/coil
> assembly out and ship that --- approx weight 90 lbs.
>
> We pull out all the core coil assemblies on our pigs and then recase them
> into a 15 x 15 x 17 in (high) 3/16" steel enclosure capped off with a
sheet
> of 1/4 in thick phenolic.  Both 240 VAC, ground, and single HV lead
brought
> out of this case.  We always connect one HV side to the core's frame.
> Later, fill tank with xmfr or mineral oil and you are ready to roll.
>
> This might be the best answer for the more distant experimenters who
really
> do need one but can't afford one due to the high freight cost.
>
> Dr. Resonance
>
>
>
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Friday, September 06, 2002 3:51 PM
> Subject: Re: Surplus Power Equipment?
>
>
> > Original poster: "Crow Leader by way of Terry Fritz
<twftesla-at-qwest-dot-net>"
> <msnip...