[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MOT supply construction question



Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>


Subject: RE: MOT supply construction question


I wonder how well
> medical grade mineral oil works?
No experience on this point (but suspect should be OK) but re taking wires
out of the MOT. I use a few strategically placed dobs of hot glue to
stabilise the point where the HV wire comes out of the MOT before I
terminate it on a lug.
Not soldering my quick connects either, no failures but I'm getting worried
reading recent posts
Best
Ted Linney in NZ