[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Yet Another Lo-Budget MOT Experiment



Original poster: "Tim J by way of Terry Fritz <twftesla-at-qwest-dot-net>" <digital_raven45-at-hotmail-dot-com>

Great show GREG!

When I ran my MOT's without secondary ballasting with shunts in I really 
started to notice heating! I have found that without shunts, MOT run cooler 
and more efficent. I've even noticed a small increase in output voltage 
too. To control output power you could hook the whole stack up to an arc 
welder, or use MO capacitor inductance to ballast the secondary side 
without blowing your mains..."if" you really want to get rid of those shunts.

A water cooling jacket also sounds like a great idea, too.

_