torrid size

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "mike by way of Terry Fritz <twftesla-at-qwest-dot-net>" <myhouse-at-northnet-dot-org>

Hi all,
     Somehow when I ran wintesla I came up with a torrid size of 3 "dt, 
22"dtc.  So I built and ran this torrid, later when I ran the prog again I 
found a 3"dt, 13dtc torrid was called for.  I built and ran this.  The 
visible difference is with the 22" torrid I get a thicker arc, with 1 
breakout point, with the 13" I get multiple breakouts with thinner 
streamers.  Both give me about the same lenght arcs, which run about 3', 
small I think for my coil, but it is about the best I have 
abtained.  Enclosed are my specs.  Could some one please enlighten me as to 
whether it is safe (for me coil) to run a larger torrid, and should I 
getter longer arcs if torrid proper size?  Thanks.
                                                                            Mike
                                                                            ab2df