[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Mutual Inductance & K Factor



Original poster: "John H. Couture by way of Terry Fritz <twftesla-at-qwest-dot-net>" <couturejh-at-mgte-dot-com>


Bart -

I sent you more data, password Kurt2 and Kurt2.1
I had no trouble downloading the Kurt1 data from your site. This data was
with no toroid. Is it possible the data came from my computer? I have found
with moderm PC's and giga bite hard drives that nothing put on the drive
ever leaves the drive even when deleted.

John Couture

-------------------------


-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, March 26, 2002 6:42 AM
To: tesla-at-pupman-dot-com
Subject: Re: Mutual Inductance & K Factor


Original poster: "Barton B. Anderson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <tesla123-at-pacbell-dot-net>

Hi John -

Cool. I'd like to run the numbers. You mentioned Kurt1 in Java. I haven't
seen it come through if you
sent it from JavaTC (hope I don't still have a problem there? I have
received quite a few the past
couple weeks and the email-out function seems to be working). If it made it
to your email, maybe you
could forward it to my email.

Also, the column heading "Java (Acmi?)" is only JavaTC, not Acmi. I'll run
Acmi numbers from Acmi for
the coil once I get the data and put those numbers into the mix.

Take care,
Bart

Tesla list wrote:

> Original poster: "John H. Couture by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <couturejh-at-mgte-dot-com>
>
> Bart -
>
> Just finished checking the K factors for Kurt Schraner's BW coil of
> 11/24/01.
> Pos = Secondary above Primary in inches.
> Mark = Mark Rzeszotarski's MandKver31 program. Thank you Mark.
>
>     Pos     Mark     Java     JHCTES
>                      (Acmi?)
>
>      0      .1609    .1552     .137
>      1      .1458    .1459     .127
>      2      .1314    .1370     .118
>      3      .1182    .1287     .111
>      4      .1061    .1207     .103
>      5      .0954    .1132     .097
>      6      .0858    .1060     .091
>
> This is a large secondary coil 15.8" dia x 70" long. It is interesting
that
> the program outputs come closer together as the coil is raised and the K
> Factors become smaller. As I said all the program outputs will be equal at
K
> = zero. We must be doing something right. (:})
>
> The data is entered in Java with password "Kurt1".
> I couldn't find if Kurt made any K Factor test using the mutual inductance
> test or the frequency test.
>
> John Couture
>
> -------------------------------------------