[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: The Danish Electricity Museum Coil.



Original poster: "Finn Hammer by way of Terry Fritz <twftesla-at-qwest-dot-net>" <f-h-at-c.dk>

No, It is made from solid copper.

It was really easy to make, since copper is a pleasure to join, and
finishing the joint is much easier than the same on alluminium.

Cheers, Finn Hammer

Tesla list wrote:
> 
> Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jimlux-at-earthlink-dot-net>
> 
> That shiny copper toroid is really nice looking...
> Is it plated over something (like steel)?  Looking at it gives me the idea
> of getting steel "donuts" (used in the exhaust system fabricating business)
> and sending it out to the bumper plating place...
> 
> Tesla list wrote:
> >
> > Original poster: "Finn Hammer by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <f-h-at-c.dk>
> >
> > So I give you the Danish Electricity Museums Tesla Coil.
> >
> > It is a looker
> >
> > http://home5.inet.tele.dk/f-hammer/Elmus.jpg
> >
> > And not so shappy a performer
> >
> > http://home5.inet.tele.dk/f-hammer/flatout.jpg
> >
> > Please enjoy!
> >                 Finn Hammer