[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: was Re: depotting/ now flyback circuits



Original poster: "jimmy hynes by way of Terry Fritz <twftesla-at-qwest-dot-net>" <chunkyboy86-at-yahoo-dot-com>

i tried doing that but there were a few pins and wires
going into it that didnt seem to connect to anything.
im guessing there are more diodes buried in there
which will be like a shorted coil in there. what would
be the best way to deal with it?


>Hi Jimmy,
> 
> Find all of the windings and which pins they connect
> to using an
> ohmmeter.  Then ground one pin from each set of
> windings.  That way you
> are certain to have the HV ground return grounded. 
> Then wind your own
> primary with 20-30 turns of wire on the ferrite. 
> After that you can
> build either the self-oscillating type of driver or
> the tuned driver. 
> There are schematics all over the web for this type
> of circuit.  Rob.



=====
JImmy