[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MOT spec data tests & question



Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Interesting tests to report
 
Wanted to know the pk current O/P of a MOT to calculate minimum time between
bangs on the SRSG.
 
Standard 900w Mwave MOT tested
 
Isec into S.C 1.7A rms
Isec feeding 22nF with static gap across cap to obtain a discharge near Vpk.
Ipk was over 3A after S.G had fired.
 
Method used measure V across 1ohm res inserted at eth end of cct measured V
across the 1ohm.
Has anybody replicated these figures ?
Best
Ted L in NZ