[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: help limiting mots



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <A123X-at-aol-dot-com>

That sounds pretty good. i'm surprised your not getting better spark output.
The only thing I can think is maybe you could do with a better primary. When
you say 4" spun toroid do you mean 4" across or 4" thick because a toroid that
is four inces thick might be too large for such a small coil. 

Mark 

In a message dated 1/21/02 1:19:07 PM Eastern Standard Time, tesla-at-pupman-dot-com
writes: 


>
> my specs are 6kv 25ma nst 11turns primary tapped at 8 made from 18 swg wire 
> ,secondary 2.2" by 12" 4" spun ali toroid, 4 gap staitic gap, .0132uf mmc 
> cap