[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: "Gas burner" corona from STSG driver



Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Gary.Lau-at-compaq-dot-com>

Be careful how you state this.  The terminal voltage of a Tesla coil is AC.
 The secondary oscillations are centered about zero volts.  Insulated
objects near the secondary will develop a DC or static charge deposited
upon them, due to the asymmetric conduction (a.k.a. rectification) of
corona.  This is what an electroscope will indicate.

Gary Lau
MA, USA


Original poster: "John H. Couture by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <couturejh-at-mgte-dot-com>


Allan -

Not correct. Tesla coils were used by hospitals to make X-Rays (DC needed)
until the thirties when other devices became available. Tesla said that
Tesla coils could produce DC because the negative output was greater than
the positive output. You can prove this by charging an electroscope with a
TC and checking the type of charge.

John Couture