Re: primary tapped at 2 turns

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "colin.heath4 by way of Terry Fritz <twftesla-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>

yes sorry i forgot to mention the tank cap (im a newbie at the mo) this
obviously altered the tap point as as i was using a half matched now im
using nearly matched at .0666uf
thanks
colin heath

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, February 19, 2002 2:04 AM
Subject: Re: primary tapped at 2 turns


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Esondrmn-at-aol-dot-com>
>
> In a message dated 2/17/02 8:11:38 PM Pacific Standard Time,
tesla-at-pupman-dot-com
> writes:
>
>
> >
> > hi all
> >         i have my primary tapped at two turns now instead if 8 turns
before
> > i was running a 7.5kv 60ma supply and i am now running 5kv 120ma
> > is it normal for the tap to go inwards rather than out because when i
changed
> > from 6kv 30ma to 7.5kv 60ma it went further out but now its two turns on
> > 120ma
> > 5kv
> > any ideas will be much appreciated
> > many thanks
> > colin heath
>
>
>
>
> colin,
>
> The tap point for tuning should change little or none as the power supply
is
> changed.
> Has something else been changed?
>
> Ed Sonderman
>
>
>