[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Dimensions of my flat spiral coil



Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

>
> This is interesting in itself.  The three wires essentially add up to a
> broad wire, three times broader than a normal wire.  I intend to wind
> another coil with copper ribbon such that the wire is taller than it is
> wide.  I was referred to a source of flattened magnet wire that appears
will
> do the job nicely.  Comparing the two coils may provide some useful
> information.
You can also get multiconductor magnet wire made for winding multifilar
windings. It looks like magnetwire ribbon cable.  It wouldn't be easy, but
you could probably wind this on edge..

Try MWS Industries as a possible source... It's worth getting their catalog
if nothing else.
>
> >>
>
>