[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

3x30ma



Original poster: "c d by way of Terry Fritz <twftesla-at-qwest-dot-net>" <vbprg1-at-hotmail-dot-com>


Ok I am getting geared up for a 1kva test
but I want to check a few things with you all

I am about to test 3x 12x30 neons and am wondering if
I am going to blow the 12amp fuse in my variac.

the value on the plate for a 12x30 is 3.6 amps.
rating x3 is 10.8 amps but I have
been told NST's are dirty and pull more without
the use of PFC caps.

So should I run my test or
go buy a replacement fuse first.

Thanks
Chris