Re: Micro Tesla Coil design

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

EMCO High Voltage makes little potted DC power supplies rated a few watts
under a cubic inch. I saw some samples at the power electronics 2002 trade
show.

KEN

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, December 19, 2002 12:46 PM
Subject: Re: Micro Tesla Coil design


 > Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<dhmccauley-at-spacecatlighting-dot-com>
 >
 > Might still be a bit big to be considered a "microcoil".  I'm looking for
a
 > transformer thats no bigger than a C-battery maybe.
 > Something like 2kV, 1mA max output or similar.
 > Secondary coil might only be 3/8"-1/2" in diameter.
 > Be very high frequency - that could pose problems in itself.

[cut]