[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

TorusForVDG



Original poster: "cd by way of Terry Fritz <twftesla-at-qwest-dot-net>" <vbprg1-at-hotmail-dot-com>

I have been wondering for a while if
you can use a torus on top of a VDG?
Or perhaps a torus like shape with the center hole coverd over by flat?
Was wondering this beacuse The torus forces breakout from the sides instead
of a random point on a real smooth shpere. A breakout works great on a tesla
coil. sending lots of energy in one direction, but a break out point on a
VGD defeats the purpose and leaks out all the charge? I believe you can use
a point/cup Ion rectifier on top of a TC to generate DC current from a TC,
but is the output of a TC setup this way then comparable to the output of a
high power VDG? VDG is a direct current generator. TC is alternating but
with an Ion rectifier its DC. Considering the point end of the Ion rectifier
would then direct the discharge would this give you a directable VDG type DC
breakout?

Just still trying to figure out this whole electricity thing...
Like thats possible...
Chris