[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OLTC update



Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ka1bbg-at-webryders-dot-net>

Geeze, your gonna need a 20 lb. block of lead to keep it from tipping over
in the wind! Awesome! cul brian f.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, August 17, 2002 1:30 AM
Subject: OLTC update


> Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>
>
> Hi All,
>
> Wow!  Long day today :-))
>
> Mostly spent figuring out the inductor...
>
> Here is a picture of the parts so far:
>
> http://hot-streamer-dot-com/temp/OLTC08-16-09.jpg
>
> The only parts of the coil that are not there, are the SonoTube secondary
> form and the top load.
>
> All the primary control and parts are there!  Not much to it...
>
> The control box weighs 9 pounds but about 5 pounds of that is in the
orange
> wire.
>
> Everything on the Lexan base weighs 16 pounds.  The Lexan itself is the
> heaviest part aside from the inductor.
>
> I think the secondary and top load will come in at 15 pounds.
>
> So the total system weight is 40 pounds, or 10 pounds less than a 15/60
NST
> ;-)
>
> Cheers,
>
> Terry
>
>
>