Re: SSTC2 - Four Foot Arcs . . . well until . . .

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Fucian-at-aol-dot-com>

In a message dated 8/10/02 1:21:01 AM Eastern Daylight Time, tesla-at-pupman-dot-com 
writes:

<< After additional inspection, it appears the Schottky diodes went first.  
And
 now as i look i see they are only rated for
 about 400-500V (oops!).  I'm going to try to see if i can get some higher
 voltage ones.  We'll back to my conventional coil.  I'll probably save this
 one for later in the fall or early winter to continue on.
 
 Dan
  >>
Hey,
Is stick with this SSTc rather than the Conventional...4 foot arcs from a 
SSTC?Im amazed!!!I mean..WOW!Get it rebuilt and keep cranking!
You can get alot of free semiconductors from Fairchild-dot-com and Onsemi-dot-com
Try them ive gotten LOTS of MOSFETs from them for nothing.Im not proud bout 
that but "starving"college students have to go that route.Id be VERY 
interested to follow your progress on your SSTC.4 foot arcs are just 
EXCELLENT!!!

Matt