[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Newbie Design help



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rblaisdell-at-juno-dot-com>

Just a tip:
you may already know this,
when you are checkin' to see if these are good, you should short each
secondary individualy to a ground rod.
because, if you are just shortin' the two leads together and one of the
two secondary's is burned out you will still get a spark.
whereas going to ground will prove without a doubt that both secondaries
are good.
peace,
-----Ry