[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Successful rebuild



Original poster: "Basura, Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <brian.basura-at-unistudios-dot-com>

Mike,

Ross-O produces 5'-6' arcs with a single de-potted 15/60. Ross methodically
removed most of the shunts and runs it in air. Beware-He is running this
NST way over the edge but it has lasted well over a year. Check it out at:

http://users.better-dot-org/roverstreet/projects/ac_coil/psu.html
http://users.better-dot-org/roverstreet/projects/ac_coil/index_ac.htm

Regards,
Brian B.

 -----Original Message-----
From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent:	Wednesday, September 05, 2001 6:51 PM
To:	tesla-at-pupman-dot-com
Subject:	Re: Successful rebuild

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Hollmike-at-aol-dot-com>

Hi all, 
   Thanks for the replies on this.   I thought it might be possible to run 
NST's without oil, but was curious to see if any brave souls actually tried 
it.  I guess there are a few.  I like the thought of using vaseline rather 
than oil.  It might get thin if warmed up sufficiently, but it  certainly 
would be great if something happened to the container and caused a leak. 
Mike 



>
> Mike, 
> Rick Williams did it with 3 of his briefly to check for corona, etc. 
> However, I think using oil or vasoline will contribute to longevity and help 
> to dissipate heat. 
> --Steve