[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Coil costs $0.00? and $,$$$,$$$+++?



Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "Jeff W. Parisse by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <jparisse-at-teslacoil-dot-com>
> 
> Terry,
> 
> It's a toss-up between the 13M and Electrum. I doubt Golka's
> cost much (porcelain toilets as insulators) but Bill Wysock, I'm
> sure, can shed some light on the subject.
> 
> As far as me... the 10J cost about $30,000 to develop into a
> working system. The gap was reworked twice, the coil was
> wound twice and lifting equipment was involved. Microsoft
> covered many of the costs.
> 
> Jeff Parisse
> www.teslacoil-dot-com

Jeff:

	Does that include the cost of labor at a reasonable hourly rate?  A lot
of us tend to forget that the labor we put into a project has value, at
least to the extent that we could have done something else and been paid
for it......

Ed