Re: vacuum pump

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "lysergic by way of Terry Fritz <twftesla-at-qwest-dot-net>" <wputts-at-earthlink-dot-net>

Might be a little off topic . I remember reading not to long ago how to make
a vacuum pump from a refrigerator compressor seems feasible enough will find
the link and post it

Liam Potts
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, November 14, 2001 11:09 AM
Subject: Re: vacuum pump


> Original poster: "Luc by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<ludev-at-videotron.ca>
>
> Hi Godfrey,
>
> WOW! nice find I envy you ;-)) check this site:
>
> http://www.tiac-dot-net/users/shansen/belljar/
>
> I remember an other discussion place but can't find the link, may
> be it could ring a bell to someone: this site arrange discussion
> group on different subject they even try to have a group on tesla
> without success.
>
> Cheers,
>
> Luc Benard
>
> Tesla list wrote:
> >
> > Original poster: "Loudner, Godfrey by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>
> >
> > Hi All
> >
> > At a laboratory surplus sale I got hold of a new General Electric
Millipore
> > vacuum pump for $20 that is rated at 1 HP and 240 volts. I want to use
it on
> > high voltage projects. It has two nozzles, two gages, two adjusting
screws,
> > and each nozzle is connected to a glass bottle. One of the bottles is
filled
> > with oil and the other bottle has some sort of filter inside. Does
anyone
> > know where I can go on the internet to find out how to use a vacuum
pump?
> > All I can find are thousands of sales sites. There were no nozzles or
> > instruction booklet with the pump. I can immediately use it to pull a
vacuum
> > on an x-ray transformer that I am converting from DC to AC output.
> >
> > Godfrey Loudner
>
>
>