[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: tungsten rods



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Hollmike-at-aol-dot-com>

Chris, 
  That would be 2% Thorium.  Either will work, but the pure tungsten might be a
little easier to cut and machine.   
Mike 


>
> I have a chance to get my hands on some tungsten welding rod for my tsg. The 
> guy says he has pure tungsten and some 2% chloride. Which would be better? 
> He also has various diameters but I would figure that the bigger the better 
> here right? Thank you in advance, 
> Chris 
>
>