Re: Coating secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "R Heidlebaugh by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rheidlebaugh-at-zialink-dot-com>

on 11/05/01 4:22 PM, Tesla list at tesla-at-pupman-dot-com wrote:

> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <Kidd6488-at-aol-dot-com>
> 
> What is the simplest, cheapest best looking, most effective way to coat/seal
> the secondary coil?  Like the peak of that curve. :-)
> 
> ---------------------------------------
> Jonathon Reinhart
> hot-streamer-dot-com/jonathon
> 
> 
I use clear fiber glass resin and one paint brush for each coat. Coat it
even and stand it vertical while it hardens. Use a little less hardener than
recomended to slow the process and give you time to work. Some people like
laquer and spending weeks to finish.
    Robert H