[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Ballast



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <A123X-at-aol-dot-com>

I'm planning to make a gapped core ballast with an MOT core. I'm looking to get
around 16amps, or 8amps if I use my variac to take the voltage to 240v. Anyway,
can I just use the original primary as the winding for the ballast? Also I
don't have anything to measure the current with. Will radioshack have good
enough meters? 

Mark