[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Discharging HV Caps



Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

Bleed resistors: 10Meg 0.7W HV resistors connected acros each cap of the MMC
do a good job. or short it out with a lexan rod with a bit of copper on the
end...

Jason
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, June 05, 2001 6:29 PM
Subject: Discharging HV Caps


> Original poster: "Ben Murrell by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<benmurrell-at-att-dot-net>
>
> WHat is a convenient way to dischage HV caps that is still safe?
> Ben
>
>
>
>