[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Three phase TC



Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Kidd6488-at-aol-dot-com>
> 
> Hello, My thought on "A" three phase TC  was to have 3 trannies, 3 caps, 3
> gaps (run of a single mod. motor (the three disks turned 120 deg.)) 3
> primarys all on one secondary. It would look like this:
> 
>     _________
>    (_________)  topload
>            |||
>            |||
>            |||
>    ====|||==== strike rail
>            |||
>    --------|||-------- pri. 1
>            |||
>    --------|||-------- pri. 2
>            |||
>    --------|||-------- pri. 3
> 
> not drawn quite to scale, but it looks good (for me anyways)
> 
> comments...
> 
> 
> ---------------------------------------
> Jonathon Reinhart
> hometown.aol-dot-com/kidd6488/tesla

	You don't need three primaries.  One should do if the gap connects to
the three capacitors in sequence.

Ed