[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Lexan, Power Factor correction..



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Parpp807-at-aol-dot-com>

In a message dated 7/2/01 9:05:36 PM Central Daylight Time, tesla-at-pupman-dot-com 
writes:

Hi Ben,
I cut all plastics and G-10 type composites with a coarse 4 TPI bandsaw blade.

Connect the PF capacitor across the primary of the NST.

Cheers,
Ralph Zekelman



<<  needless to say I used a bandsaw from then
 on.. 
 
 Now, on to the question.. when adding capicitors to a NST
 for power factor correction, do they go in parallel or
 series with the primary? 
 
 Thanks for any help!
 
 Ben McMillen >>