[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: LTR&MMC



Original poster: "Dan Kline by way of Terry Fritz <twftesla-at-uswest-dot-net>" <ntesla-at-nc.rr-dot-com>

At 12:20 PM 1/24/01 -0700, you wrote:
>Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net>
>
>Hi Tero,
>
>I did a computer study below that generally andwers this question.
>
>http://hot-streamer-dot-com/TeslaCoils/Misc/NSTStudy/NSTStudy.htm
>
>I constantly refer to this data for NST/cap sizing.  The LTR sizes are the
>values that give 120BPS operation.  This data is only for static gap NST
>systems.
>
>Unfortunatly, I don't think it will be of use in your case unless you can
>add or guess you case.  If your trannies are not current limited types, it
>may not help at all...
>
>Cheers,
>
>         Terry

Excuse the cluelessness, but how does one interpret that data?
Thanks,
Dan