[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Top load capacity



Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net>

Hi J.B.,

Thanks for the report back!  These programs and all have a lot of time,
work, and thought put into them.  It is wonderful to know that it all
actually works!! :-))

Cheers,

	Terry


At 04:50 PM 1/16/2001 +0000, you wrote:
>
>Hello Coilers & Terry,
>
>I had a question about calculating the capacity of a double toroid top
>load last week, as WinTesla only allows for one toroid.  Terry suggested
>that I use E-Tesla6 to find the capacity of the double toroid and then
>simply insert the result into the topload page of WinTesla.
>
>I wanted to let you know that the suggested method worked just fine and
>produced excellent results.  The tap point on the primary was within
>less than one quarter of a turn of where WinTesla predicted it to be.
>These software programs are great...sures saves a lot of cut and try!
>
>
>73, Weazle, VE3EAR/VE3WZL
>
>Listening: 147.030+ and 442.075+
>E-mail:    weazle-at-hurontel.on.ca
>           or ve3ear-at-rac.ca
>Web site:  www.hurontel.on.ca/~weazle
>