Re: RadioShack

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Martin Lewis by way of Terry Fritz <twftesla-at-uswest-dot-net>" <mlewis-at-livingsprings-dot-com>

Hey Ted
How much would it cost for me to order all my parts I can from RS and then
the rest from places you recommend.  I would like to build one that would
get me at least a 10 ft arc, bigger the better.
Also, if you know anyone that is willing to sell one that meets that
criteria and doesn't cost and arm and leg let me know or ask them to get in
touch with me ASAP.
thanks
ml
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, January 02, 2001 5:53 PM
Subject: RadioShack


> Original poster: "Ted Rosenberg by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>
>
> Tim: Just a quick note. I have been with RS for almost 20 years. If I can
> assist with respect to locating a catalog item, let me know. BTW,
> regrettably, RS does not sell larger than 5x7 perf board. But theyb are
> inexpensive. To build Terry's NST filter, I had to use 2 boards...one for
> each HV leg. It worked well but took a bit more room.
> If you need a pictorial drawing, contact me off list.
>
> Safety First
>
> Ted
>
>
> <snip>
>
> I have downloaded your pics about the protection circuit for my NST and I
am
> a
> little unsure about where to start. I am not even sure what perf board is.
> However,
> I am going to make friends with the local Radio Shack and I will learn.
>
>
>
>