[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: cable and enamelled copper wire



Original poster: "Mark Hales by way of Terry Fritz <twftesla-at-uswest-dot-net>" <markhals-at-dircon.co.uk>

Gavin.
Maplin is mentioned below and 3 years ago I bought 3 metres of EHT wire from
their place in Forest Hill, SE London, so I'd imagine their catalogue (WH
Smith) would be as good a place to start as anywhere.
Cheers... Mark H.

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, February 27, 2001 12:58 AM
Subject: Re: cable and enamelled copper wire


> Original poster: "Steve Cook by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<Steve-at-g8cyerichmond.freeserve.co.uk>
>
> for large reels of enamelled copper wire, possibly The Scientific Wire Co
> may be able to help, unfortunately I dont't have a URL for them, smaller
> reels are available from Maplin, or Electrovalue. High voltage cable is
> trickier, personally i use solid polythene dielectric  coax cable minus
the
> screening.
> ----- Original Message -----
> From: Tesla list <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Monday, February 26, 2001 11:51 PM
> Subject: cable and enamelled copper wire
>
>
> > Original poster: "Gavin Dingley by way of Terry Fritz
> <twftesla-at-uswest-dot-net>" <gavin.dingley-at-ukf-dot-net>
> >
> > Hi all,
> > does any of you know of a supplier of high voltage cable (>5kV) and
> enamelled
> > copper wire for secondary coil winding, in the U.K.
> >
> > Thank you in advance for your help.
> >
> > Gavin, U.K.
> >
> >
> >
> >
>
>
>