[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: cable and enamelled copper wire



Original poster: "Jonathan Leech by way of Terry Fritz <twftesla-at-uswest-dot-net>" <jonathan-at-heatwaves.co.uk>

Hi Gavin,

I have looked at getting copper wire from a transformer manufacturer and a
motor rewind company. There are several up and down the UK. Try Yellow pages
for your area, or if you are near Newcastle upon Tyne or Bishop's Stortford
in Herts I can give you an address.
As for the HT cable my thoughts would be to check out a boiler company or
car parts supplier. I am thinking of the cable used to run from the
distributor to plugs if you can still buy it off a drum (not ready made
leads) or as used on the transformer to spark ignition on a big boiler.

Jonathan. UK

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, February 26, 2001 11:51 PM
Subject: cable and enamelled copper wire


> Original poster: "Gavin Dingley by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <gavin.dingley-at-ukf-dot-net>
>
> Hi all,
> does any of you know of a supplier of high voltage cable (>5kV) and
enamelled
> copper wire for secondary coil winding, in the U.K.
>
> Thank you in advance for your help.
>
> Gavin, U.K.
>
>
>
>