[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: NST's



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Mddeming-at-aol-dot-com>

In a message dated 12/30/01 8:44:43 PM Eastern Standard Time, tesla-at-pupman-dot-com
writes:


>
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <Hightensions-at-aol-dot-com>
>
> Hello, 
> I have had the good fortune to have been given 3 30ma 15KV NST's. I was
> wondering about what size secondary would work best with one of them and also
> what I should step up to when I run them all together? Any help would be
> greatly appreciated, 
> Robert
>



Hi Robert,

A 4-5" diam secondary with about 1000 T of #24 should work well for
15/30-60-90, only the top load and the cap will change. You will probably need
a 6x36 -at-90ma but a 4x24 will work -at-60ma and a 4" sphere or small toroid would
work -at-30ma.
These are good middle-of-the-road numbers to get you started.
Hope this helps,
Matt D.