MY coil specs

["Kevin D" <teslacoilfreak1-at-mediaone-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

   Hi everyone I am posting the specs for my coil to try and root     out
any problems(some info comes from WinTesla and has   not been     measured
yet,still waiting on my LCR meter.)I may have posted more   info than needed
but the more the better I    guess..
  anyway one thing that is troubling me is the number of primary   turns
only 6..is that to little?Thanks in advanced for any input!

  Kevin D.

 Specs.

 PRIMARY COIL :
 #22 wire
 3.1503" O.D.
 18.90" length
 37.48 t.p.i.
 H/D aspect ratio 6
 inductance 5.76 mH (not measured)
 Medhurst K 0.90
 self C 7.19pF
 wire length 566.63'
 todal turns 687.04
 resonant freq. w/o topload 781.66kHz
 resonant freq. w/ topload of 19.61pF 404.94kHz

 PRIMARY COIL:
 style flat archimedes spiral
 .250" O.D tubing
 coil I.D. 5"
 turn spacing .250"
 total turns 6
 inductance .0088mH (not measured)
 tubing length 12.17'
 total Dia. 10.50"
 tap point w/ .0233uF tank capacitance 5.2 turns approx.

 TRANSFORMER INFO:
 4 parallel connected 10kV 23mA OBIT's
 total current output 92mA
 input 115VAC -at- 60Hz
 PFC cap needed for 100% correction 169uF
 cap match .0244uF

 TOPLOAD :
 4" x 14" aluminum ducting toroid
 19.61pF using Bert Pool equation

 MMC INFO :
 Panasonic ECWH-V series Polypropylene 1.6kV .056uF
 5 strings of 12 caps
 max. volts/string 19.2kV RMS
 capacitance/string .00466uF (not measured)
 total capacitance .0233uF (not measured)

 SPARK GAP INFO:
 10 1/2 copper pipes in a linear TCBOR/RQ setup pipes
 are spaced at .02" using card stock as a reference.
 gap is adjusted Via copper strap