Re: Hosfelt snubber caps

[MShock8073-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

In a message dated 9/10/00 5:56:52 PM Eastern Daylight Time, tesla-at-pupman-dot-com 
writes:

<<  WARNING:  Although RS doesn't list the voltage rating of those little
 resistors, a typical value is about 200 VDC.  If I were using them I'd
 put enough in series (across each capacitor) to make sure the voltage
 was less than about the 200 I mentioned above.
 
 Ed
  >>
Actually.....the radioshack-dot-com commercial catalog that I was speaking of 
does list the specs on the resistors. 1/2 watt carbon film,+/-5% tolerance, 
Max working voltage:350V.
Current pricing is 100 or more $.01 each.