[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PVC Drying



In a message dated 7/28/00 8:49:09 PM Pacific Daylight Time, tesla-at-pupman-dot-com 
writes:

> Original poster: Irrelative-at-aol-dot-com 
>  
>  I've heard by many people that you're supposed to 'dry' a PVC secondary 
>  before you seal, wind, etc it.  I'm curious to know if there really is 
that 
>  much moisture in a PVC pipe.  It seems as though a piece of plastic 
wouldn't 
> 
>  pick up too much moisture, but I could be wrong.  Has anyone made a coil 
>  without drying their PVC secondary?  What results did you get?  Thanks!

Ir.,

I never dry my pvc or seal it, etc.  I just wind the coil and use it.
I have not had any problems.  My coil and info can be seen at:

   http://hometown.aol-dot-com/futuret/page1.html

Cheers,
John Freau