[Prev][Next][Index][Thread]

Re: DC Controlled Reactance Choke



D.C.,

Do you have a commercial unit yet?...

Jeff


> This concept works very well.  We use it in our reactors for higher
powered
> coil systems.  Using a gapped core E-I reactor you wind approx 150 turns
> around the center of the E lamination and then wind your normal reactor
> windings over this.  By running approx 75-100 VDC at 3-5 amps through the
> center winding you have complete control over the reactor's performance.
>
> Dr. Resonance