[Prev][Next][Index][Thread]

Re: UK supplier of FR4/G10



my problem was that some of the dust inevitably sticks to the stuff you are
sawing, laying in wait for the next time you touch the piece.
-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Friday, February 25, 2000 2:18 AM
Subject: Re: UK supplier of FR4/G10


>Original Poster: Parpp807-at-aol-dot-com
>
>In a message dated 2/24/00 8:12:15 PM Central Standard Time,
tesla-at-pupman-dot-com
>writes:
>
><<  but that fiberglass dust is horrible stuff. I itched for weeks....
>  >>
>Yes, that's an important point when cutting glass laminates. The stuff is
as
>bad as fibreglass insulation. I have used (sacrificed) a fine-toothed,
>metal-cutting bandsaw blade. I also go to the trouble of clamping the
nozzle
>of my big-suck shopvac right against
>the cutting point to grab all that dust.
>
>Cheers,
>Ralph Zekelman
>
>
>