Re: Pole Pig Question

• To: tesla-at-pupman-dot-com
• Subject: Re: Pole Pig Question
• From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 21 Feb 2000 13:00:20 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

In a message dated 2/21/00 2:15:15 AM Pacific Standard Time, tesla-at-pupman-dot-com 
writes:

<< Original Poster: "Ryan Ries" <spud-at-wf-dot-net> 
 
 Well, on the same question, how would go about using a single phase
 transformer for a Tesla coil if it only has one 'horn' and one input
 terminal?
    
    Thanks,
         Ryan  
  >>
Ryan,

You would open the transformer up, find the high voltage output winding that 
is connected to the case, isolate it, drill a hole in the case, install a 
high voltage feed through type bushing and connect the wire.  I believe 
Richard Quick did this to a single bushing transformer that he had.

Ed Sonderman

• Prev: Re: weather influence on TC performance
• Next: Re: Homemade Trasformer
• Index(es):
  • Main
  • Thread