[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Polyplate cap



Original poster: "=?iso-8859-1?Q?=22Mattias_Engstr=F6m=22?= by way of Terry Fritz <twftesla-at-uswest-dot-net>" <mattias_engstrom-at-swipnet.se>

One small question,
does the cap's value increase or decrease when you submerge it in xfrm-oil.
    I have used polyethylene as dialectric, each layer about 0,40mm thick
 
regards 
Mattias