[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: winding the primary?



MIKE-
 For the *perfect* primary see the link below. Many people use this method
but never bother to describe it in detail. There's not much to it, but it
requires a band saw and a drill press. I don't have either of those tools
(yet) so I'm going to make my primary coil at school. A rotozip (spiral saw)
in a router table with a hand drill might work alright, but it's best not to
improvise too much. Good luck.

    -Michael


----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, August 30, 2000 11:36 PM
Subject: winding the primary?


> Original poster: "homie" <ff-at-hotmail-dot-com>
>
> hi all,
>
> i am winding my primary and it is really starting to hack me off! i am
using
> 1/4in od copper tube. it is a pancake coil that is 9 turns and it wont
stay
> in place does anyknow "the KEY" to getting a perfet primary? i have seen
> some real nice ones and i just cant see how. some say just work
> slowly...well that dount seem to work i haev spent more time on the
primary
> then i spent winding the secondary.
>
> also i am looking for a varic ya i have seen them for sale but ya know $$
is
> always a issue and they are likr 160 dollers does that seem right? does
> anyone know how i can optian one for cheaper or is this as cheap as they
> come?
>
> thanks alot,
>
> MIKE
>
>
>
>