Re: Tesla motor receiver

[Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

In a message dated 8/30/2000 9:14:57 AM Mountain Daylight Time, 
tesla-at-pupman-dot-com writes:

> 
>  Richard and Mike,
>  
>  a few quick thoughts here...
>  
>  remember that the transmitting coil should have a very large topload. so 
>  much so that no arcing is permitted. in this way 90% (roughly) of all the 
RF 
> 
>  energy is pumped into the ground instead of it being spent as spark.
>  
Dan, 
   I did state that one needed a large topload to prevent the arcs.  
Mike