RE: Attaching HDPE

["Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Thanks for the suggestions everyone. It appears that nylon bolts are the
best approach. Unfortunately, in checking my local Ace and Lowe's I found
only 2 inch long 1/4-20.
So, I will counter sink a hole at each end of the support so that the 2 inch
bolt will reach through the vertical support and through the 1/2 inch
primary platform.
Onward!
and Be Careful Out There.

Ted R.
-----------------------------
Original poster: Terry Fritz <twftesla-at-uswest-dot-net>

Hi Ted,

	Hot melt glue and nylon screws.  Not much else even "tries" to stick
to
poly...

Cheers,

	Terry
-------------------------------------
At 01:30 PM 8/7/00 -0500, you wrote:
>I am about to construct my primary.
>Many see to use HDPE for the supports and I would agree.
>However, let's say you have a 1/2 inch thick by 2 inch tall strip (times 6
or 8)
>how do you attach that strip to your wood primary platform?
>Metal screws from beneath?
>Epoxy? (does it stick?)
>Silicon sealant?
>Open to suggestions all (y'all)
>
>Ted R.
>