[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: High Voltage Snubber .1u 3kV = rejects caps



Additional note. While investigating the construction used in these
caps, I contacted GE about them. GE (after I ended up calling all over
the country) has no current part number that matches these caps, and
none of the engineers I talked to could answer my questions. One person
did tell me that this was an old number and not produced any more. I
proceeded to order a dozen of them. I then tested them across a gap and
a NST (12/60) starting with 10 in series and reducing them down to 3 in
series to get some kind of idea on heat buildup. I was eventually able
to get a burn on the outter covering when I got down to 3, but after it
had cooled down, I tested the bad cap and it showed good (????). Anyway,
I went ahead and ordered 150 pieces and built several strings of
12/string, and they work fine and with no failures to date (only a few
months now). Hosfelt still had about 1000 caps in inventory at the time
of the last order.

Terry (not the Friztmeister one)????spelling??

> ----------
> From: 	Tesla list[SMTP:tesla-at-pupman-dot-com]
> Sent: 	Tuesday, August 01, 2000 6:03 PM
> To: 	tesla-at-pupman-dot-com
> Subject: 	FW: High Voltage Snubber .1u 3kV = rejects caps
> 
> Original poster: "Dale Hall" <Dale.Hall-at-trw-dot-com> 
> 
> Jeff,
> There have been several posts citing great success with the Hosfelt
> .1uF 3
> kV caps.
> 
> Do you have any detail (conditions) on how they have failed ?
> ref: "someone"
> (can we rule out misuse/abuse?)
> 
> How was the determination of factory rejects arrived at ? 
> or is it just conjecture ?
> 
> Regards, Dale
> 
> -----Original Message-----
> From: Tesla list [mailto:tesla-at-pupman-dot-com] 
> Sent: Thursday, July 27, 2000 7:16 AM
> To: tesla-at-pupman-dot-com
> Subject: High Voltage Snubber .1u 3kV = rejects caps
> 
> Original poster: "Jeffery Pederson" <kd4lyh-at-webtv-dot-net> 
> 
> Hello,
> Earlier today I mentioned that there was some .1mfd 3000vdc made by
> G.E
> for sale . Someone contacted me off the list about these caps . Some
> people have had trouble with these caps. I guess these are factory
> rejects offered at a low price thru an electronics outlet. I was just
> trying to help people out on the list. The moral of my story is if it
> sounds to good to be true then it is. I have not purchased any of
> these
> caps for an mmc application.
> Regards Jeff
> 
> 
> 
> 
> 
>