Re: toroids

• To: tesla-at-pupman-dot-com
• Subject: Re: toroids
• From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 19 Sep 1999 09:21:03 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

to: Trabraze

You want a toroid that is 170 to 200% larger than the dia. of your sec coil
form for optimum operation and efficiency.  Larger than this size also works
but the costs become enormous.

Regards,

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Saturday, September 18, 1999 3:57 AM
Subject: toroids


>Original Poster: "MalikAT" <MalikAT-at-holycross.ac.uk>
>
>
>Hi It's Tab,
>I've just seen this site www.members.tm-dot-net/lapointe/Toroid.htm it shows a
>toroid with a pressure release system. Is this nessesary? Is there a rule
>or consensus that tells me how big a toriod can be. I want big sparks wich
>means big toroid but what is too big?
>Thanks in advance.
>
>Tabraze
>malikat-at-holycross.ac.uk
>
>
>
>
>
>
>
>
>============================================
>Disclaimer:
>
>Any opinions expressed in this email are not
>necessarily the opinions of Holy Cross College.
>Holy Cross College can not be held responsible
>for any of the contents of this message.
>
>If you have received this email in error please
>delete the message from your system.
>=============================================
>
>
>
>
>
>
>
>

• Prev: Re: Tungsten electrodes in static gap?
• Next: winding my own transformer
• Index(es):
  • Main
  • Thread