[Prev][Next][Index][Thread]

Re: 84" CoiL (fwd)



 > >
> > 15 kva transformer
> > rotary: Bill Wysock TTR 600 pps
> > cap: Maxwell .16 ufd 45 kV
> > secondary: 84" x 23" atop a 28" base cabinet
> > primary: 1/2" refer tube ~8 turns flat
> > ballast: two 225amp arc welders in parallel (soon to have a
TTR
> > control box/ballast)
>
> Cabbot,
>
> Sounds very interesting tell us more What's your sec wire
choice

#10 square mil

, total turns, ~ 700

 spacing  none ...  (beside the 1/16" HV super duper insulation
on the wire)

> or TPI. (?)

 Also what is your transformers out put voltage. 15 kv

Do you have a
> toroid size in
> mind.  Not too large, but i will experiment.

> I'm in North Carolina and will not get to see yours run but
> I'm starting my 14" x 55" coil soon with a .12 uf -at- 60kv
maxwell
> and a 5kva -at- 14400 vac pig.
>
Wow... good luck maybe we can exchange video clips when we are
done.. or at least pix

> Good Luck keep us posted
>
> Rick Kirby
>

will do!