[Prev][Next][Index][Thread]

Re: New LTR Stuff



At 06:12 PM 6/9/99 +0100, you wrote:
snip......
>>sync03.jpg - The back of the rotor showing the 3/8-20 bolt, the poly disk,
>>and the tungsten electrodes.  I hope the disk does not melt but this gap
>>will see fairly easy service so it should be ok...
>
>Superb photos again terry,
>	How are the electrodes held into the disk?
>bob golding
>

I drilled 1/8 inch holes through the poly on a drill press and the holes
hold the rod very snugly just from friction.

	Terry


References: