[Prev][Next][Index][Thread]

Re:design of my first coil (caps)



>
>The "object" is a high voltage capacitor. The '500MMFD' means that it has a
>capacitance of 500 micro-micro-Farads or 500 pF (0.5nF). On its own, this
>capacitor is too small to drive a typical Tesla Coil. The '20KV' is the
>maximum DC voltage that can be applied across the capacitor.
>
>You would be better off making a polyethylene or salt-water capacitor
>(unless you physics teacher has 40 or so more spragues).

Well he has 13 of them. 13*500E-12=0.0065mf, which is what I need. Now, the
question is will these cap resist the 12KV AC if they are made to resist to
20kV DC. If I'm right, the peak value of the xformer would be 16.5KV... I
think if the cap is rated for 20KV DC, it should resist the 17KV (peak) and
maybe more with the kickbacks. What about buildin a second safety gap at the
caps???

Sam