Re: RSG question

• To: tesla-at-pupman-dot-com
• Subject: Re: RSG question
• From: "B2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 23 Dec 1999 16:10:01 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Try teflon.  Use with lots of ventilation.

Cheers
Barry

----- Original Message -----
From: "Tesla List" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, December 22, 1999 7:48 PM
Subject: Re: RSG question


> Original Poster: Bunnykiller <bigfoo39-at-idt-dot-net>
>
> Tesla List wrote:
> >
>
>
> HI Phil...
>
>
> I tried what you have thought of ...  and it worked fairly well
until
> the disc started to carbonize between the holes. The sound was
rather
> interesting and unique from a standard disc with mounted electrodes.
It
> had a more so whirring / whistle than the rapid fire machinegun
effect.
> If you find some hi quality scorch PROOF material i think it would
work
> at lower power ranges   but when you are pumping 8KW thru a gap set
its
> bound to get really hot  :)
>
>
>
> Scot D
>
>
>

• Prev: RE: Induction heating in toroid / short circuit of secondary
• Next: Re: THOR PROJECT STATUS
• Index(es):
  • Main
  • Thread